eRepair

The Professional solution for your electronic problems

Eprom Programmer

The Best Eprom Programmer

Xeltek universal programmers support a variety of EPROM/EEPROM chips from many different manufacturers. Xeltek’s programmers and user-friendly software dually provide an efficient way to program the chips. It is important to have a basic knowledge of EPROM/EEPROM chips before programming and also learning how to correctly program the chips with SuperPro software. Visit our web to get more information Xeltek Indonesia – www.iij.co.id.

What is EPROM?

An EPROM (rarely EROM), or erasable programmable read only memory, is a type of memory chip that retains its data when its power supply is switched off. In other words, it is non-volatile. It is an array of floating-gate transistors individually programmed by an electronic device that supplies higher voltages than those normally used in digital circuits. Once programmed, an EPROM can be erased by exposing it to strong ultraviolet light from a mercury-vapor light source. EPROMs are easily recognizable by the transparent fused quartz window in the top of the package, through which the silicon chip is visible, and which permits exposure to UV light during erasing.

SuperPro EPROM Programmer

From our lowest cost Superpro M (supporting 19,880+ devices) to our high end standalone model SP5000 (supporting 65,000+ devices) we have all the options to cater to your needs. Contact us so we can help you in deciding your programmer at PT. INTI INSTRUMEN JAYA.

Xeltek SuperPro  M

Features

  • Fastest Lowest-cost Programmer: With ARM7 MCU it gives ultra-fast programming experience.
  • Programs devices with Vcc as low as 1.2V
  • Built-in 48 universal pin drivers
  • CE and ROHS Compliant
Detailed Features
  • Supports 19,880 IC devices from 158 manufactures.
  • Programs devices with Vcc as low as 1.2V.
  • Ultra fast programming.
  • Built with 48 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages.
  • The programmer operates in PC hosted mode.
    • Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip.
  • ISP/ICP programming capability through optional ISP/ICP adapter.
  • Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
  • Provides over-current and over-voltage protection for safety of the chip and programmer hardware.
  • Compatible with Windows 7 & Vista & XP 32/64 bit
  • Includes the following advanced and powerful software functions:
    • Chip operation starts immediately upon proper chip insertion in Production Mode.
    • The Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step.
    • Password protection provides security for project files and production volume control.
    • The Batch command combines device operations like program, verify, security into a single command at any sequence.
    • Auto Increment Function option to indicate an automatic increase in the serial number written to each chip.
    • A Log file provides quality tracking.
Speed Comparison
Device Program + Verify (Sec) Compare with SP3000U Type
AT28C64B 0.8(P)+0.1(V)= 0.9(s) 1.2(P)+0.8(V)= 2.0(s) 64Kb EEPROM
24AA128 2.7(P)+1.8(V)= 4.5(s) 5.0(P)+4.0(V)= 9.0(s) 128Kb EEPROM
QB25F640S33B60 29.0(P)+14.4(V)= 43.4(s) 55.2(P)+41.4(V)= 96.6(s) 64Mb EEPROM
AT89C55WD 2.5(P)+0.4(V)= 2.9(s) 3.3(P)+1.0(V)= 4.3(s) 20KB FLASH MCU
S25FL064A 43.9(P)+14.7(V)= 58.6(s) 72.8(P)+41.4(V)= 114.2(s) 64Mb SPI EEPROM
PIC16F876A 10.1(P)+0.8(V)= 10.9(s) 22.1(P)+06.2(V)= 28.3(s)

Hardware & Electrical Specifications
  • Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic
  • Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,…
  • PC interface: USB2.0 (High speed)
  • Power supply: AC Adapter: Input AC 90V- 250V, 50/60Hz; DC Output: 12V/2A; power 15W
  • Main unit: Dimensions 178mm (L) * 130mm(W) * 40mm (H) Weight 0.85 lbs (0.8Kg)
  • Package: Dimensions 320mm (L) * 300mm(W) * 85mm (H) Weight 3 lbs (1.8Kg)
Enhanced by Zemanta

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: